Energya is the highest quality digital console that radio stations have waited for. It is simply innovative, flexible, sophisticated and with an enhanced new-styling ideal for a modern broadcast studio.
Energya got all the features you need: 24 input channel, four microphone input, sixteen analog line input, four AES/EBU digital input, two telco interface, digital router and dramatic improvement in audio quality provided by an all-digital signal path. Energya offers you all the functionality expected from this ultimate console like mixing and monitoring facilities, logic controls, TCP/IP connection and serial control.
Energya has a modern low profile design and intuitive control surface that will be immediately familiar to all users. Energya is the ideal solution for the new computer based studios
INPUT
– 4 Mic transformer balanced inputs
– 4 Digital AES/EBU stereo inputs
– 16 Balanced analog stereo inputs
OUTPUT
-PGM Analog (24 Bit D/A) and Digital AES/EBU with SRC
– UTL Analog (24 Bit D/A) and Digital AES/EBU with SRC
– Mono Analog (24 Bit D/A)
– Telco 1 & 2 CleanFeed Analog (24 Bit D/A) and Digital AES/EBU (48 KHz No- Sync)
CHANNEL FUNCTIONS
– Name assignment to each input (4 characters)
– Source Type ( Mic, Line, Digital, Telco)
– Level adjustment
– Phantom Power (for Mic Input only)
– Insert (for Mic Input only)
– Voice Processor (Compressor, Limiter, Expander)
– Busses assignement (PGM-UTL-Telco 1 and 2)
– Mode Selector (Left/Right/Stereo/Mono)
– Pan
– Balance
– Phase Reverse
– Control Room and Studio Mute
– Timer Restart
– Tally 1 and 2 Logic
– Intercom mode
– Start/Stop Control Logic
MONITORING
– Level Control of the Headphones, Control room and Studio
– CUE Speaker Built-in CUE Speaker (with monitor selector)
– Level Meters on 8.4” Color Display
– Built-in H/P Amplifier
MICROPHONE INPUT:
Input configuration transformer balanced
Source Impedance 200 Ω
Input Level Range Adjustable from -70 ÷ -40 dBu
Maximum Input Level -30 dBu
Phantom Supply 42 Vdc selectable, with 3k3 c.c. protection
Connector XLR-type, Female, EMI suppressed
MICROPHONE INSERT:
Insert Output configuration Unbalanced
Insert Output Impedance 100 Ω
Insert Output Level 0 dBu (range ± 12dB)
Connector DSUB 9 pole female
LINE INPUT:
Input configuration Electronically balanced
Input Impedance >10 KΩ (600 Ω wired selectable)
Input Level 0 dBu (Adjustable ± 12 dB)
Headroom + 8 dBu
Connector DSUB 9 pole female
EXTERNAL INPUT:
Input configuration Electronically balanced
Input Impedance >10 KΩ (600 Ω wired selectable)
Input Level 0 dBu (Adjustable ± 12 dB)
Headroom + 8 dBu
Connector DSUB 9 pole female
ANALOG OUTPUT:
Output configuration Electronically balanced
Output Impedance 100 Ω
Output Level 0 dBu (Adjustable ± 12 dB)
Connector DSUB 15 pole female
DIGITAL INPUT:
Input configuration Professional Balanced AES EBU standard
Input Impedance 110Ω shielded twisted pair
Input Sample rate 32, 44.1, 48, 96 KHz (Auto Detect)
Connector DSUB 9 pole female
DIGITAL OUTPUT:
Output configuration Professional Balanced AES EBU standard
Output Impedance 110Ω shielded twisted pair
Output Sample rate 32, 44.1, 48, 96 KHz Selectable*
Connector DSUB 9 pole female
SYNCRONIZATIONS:
Frame
Input / Output configuration Professional Balanced AES EBU standard
Input / Output Impedance 110 Ω shielded twisted pair
Connector DSUB 9 pole female
Word Clock Greater than 600 Ω
Input / Output configuration Professional Balanced AES EBU standard
Input Impedance 10 KΩ
Output Impedance 100 Ω _
Connector BNC ground
LOGIC INPUT:
Configuration Opto-coupled (with internally 330Ω protection)
Max Voltage input 5 Vdc (for 10 mA input)
Max Reverse Voltage 5 Vd
Connector DSUB 37 pole female
LOGIC OUTPUT:
Configuration Optic solid state relay
Max Voltage 50 Vdc/ac
Max Current 100 mA
Connector DSUB 37 pole female
STUDIO I / O:
Studio Logic Input
Configuration Opto-coupled (with internally 330 Ω protection)
Max Voltage input 5 Vdc (for 10 mA input)
Max Reverse Voltage 5 Vdc
Studio Logic Output
Configuration Optic solid state relay
Max Voltage 50 Vdc/ac
Max Current 100 mA
Connector DSUB 15 pole female
ROOM I / O:
Room Logic Output
Configuration Optic solid state relay
Max Voltage 50 Vdc/ac
Max Current 100 mA
Connector DSUB 9 pole female
CRT:
Configuration Type VGA 800×600 (V 72 Hz, H 53,3 KHz)
Connector High density DSUB 15 pole female
RS 232:
Configuration Type RS232 standard DCE
Connector DSUB 9 pole female
LAN:
Configuration Type ETHERNET 10 Base T
Connector RJ 45
HEAD PHONES:
Configuration Type Stereo unbalanced
Output Impedance 50Ω
Connector JACK 6 mm
