Stargate is a digital stereo encoder and RDS coder for broadcast applications that has been designed using highly innovative technology.
The result is the most advanced that a stereo broadcasting system can offer, with an exceptional array of features.
Besides guaranteeing excellent stereo separation between channels, AEV’s Digital Stereo Encoder ensures a transparency of sound never before reached, whilst maintaining exceptional stability.
Stargate can be installed instantly and can be matched perfectly to any transmission system without calibration.
STEREO CODER
It employs a digital modulator at a sampling rate of 32x that generates frequencies at 19 and 38 KHz for respectively the pilot and subcarrier. The employment of a great quantity of “samples” offers a better spectrum clarity and mantains the MPX signal constant. The stereo separation levels are constantly over 65 dB.
RDS the latest Satellite-programmable version. Radio Data System is an inaudible, digital information, transmission system, introduced by FM radio stations in addition to audio programs.
The latest radical development of this system now allows programming of the RDS Coder via Satellite, an indispensable innovation that AEV has implemented with the creation of the RDS 4500.
COMPOSITE PROCESSOR:
In order to limit the overshoots, Stargate uses “DSP-Filtering” system composed with a couple of digital lowpass filters, an exclusive AEV “hybrid”, that allows not only a phase linear design, but also dynamically flat responses together with 115 dB/oct slope.
The qualities of this system grant perfect spectrum clarity up to 15 KHz.
At the modulator output another “Safety Clipping” stage removes the remaining overshoots produced by the filters.
INPUTS:
Analog audio input configuration: Electronically balanced Left & Right
Input level: -10 ÷ +10 dBu
Input Impedance: > 10 KΩ or 600 Ω dip switch selectable
Common mode reject: Greater than 50 dB (30 Hz ÷ 15 KHz)
Connectors: XLR Female, EMI suppressed
STEREO GENERATOR:
MPX Output configuration: 1 output with level control
Composite output level: 0 ÷ +12 dBu
Output Impedance: 50 Ω
Connector: BNC grounded to chassis
Pilot Frequency: 19 KHz ± 0.001% Max over temp.
Pilot injection: 4 ÷ 12 % adjustable internally
Frequency Response: (± 0.1 dB) 30 Hz ÷ 15 KHz
Stereo Separation: Greater than 64 dB 30 Hz ÷15 KHz (78 dB to 1 KHz)
Crosstalk Sub to Main: Greater than 40 dB 30 Hz ÷15 KHz (64 dB to 1 KHz)
Distortion to 1 KHz: Less than 0.005 %
Signal to noise ratio: Greater than 96 dB DIN audio.
38 KHz Subcarrier Suppression: Greater than 80 dB
76 KHz and sideband Suppression: Greater than 90 dB
Preemphasis: 50-75 μSec dip switch selectable
Pilot tone Sync IN/OUT: dip switch selectable
Connector: BNC grounded to chassis
Pilot Reference Output: 1 Vpp square wave
Impedance: 600 Ω
Pilot Reference Input: 1 Vpp sin. wave
Impedance: 10 KΩ
SCA Input: -14 ÷ +6 dBu for 10% modulation of main carrier.
SCA input Impedance: 10 KΩ
RDS Generator:
RDS signal: Standard specif. EBU Doc.Tech. 3244-E & Cenelec En 50067
Coding: Differential and Biphase
Modulation: DSB-suppressed carrier
Frequency: 57 KHz
Bandwidth: ± 2.4 KHz
RDS injection into MPX signal: – infinite ÷ – 16 dB
RDS output level: 0 dBu
Output Impedance: 100 ohm (max load 5 Kohm)
Connector: BNC grounded to chassis
Data Syncrhonization:
Terminal Interface: RS232-C at rear, asynchronous
Data Input: Full duplex
Format: Selectable
Transmission Speed: 2400 ÷ 19600 baud
Connector: 9 contact subminiature cannon female
Remote I/O: MS, TA, RDS OFF Cmos level
Connector: 25 pin subminiature cannon female
Power requirement: 87 ÷ 265 VAC 50 ÷ 60 Hz
Consumption: 8 VA
Dimension (WxHxD): 48.3 x 24 x 4.4 cm 1 rack unit
Weight: 2,5 Kg. (5.5 Lbs)
Operating Temp.: 0 ÷ 50° C
RDS Data management Microprocessor controlled 128 Kbyte
Non volatile memory RAM data retention 10 years.
